Working With Detergent; Residual Risks; Technical Data - Scheppach HCE2600 Instrucciones De Utilización Y De Seguridad

Other risks
m DANGER
• The appliance may not be operated in explosive atmos-
pheres.
• Never use the appliance to clean objects containing hazard-
ous substances (e.g. Asbestos).
• Never draw in fluids containing solvents or undiluted acids
and solvents! This includes petrol, paint thinner and heating
oil. The spray mist is highly inflammable, explosive and poi-
sonous. Do not use acetone, undiluted acids and solvents, as
they corrode the materials used on the appliance.
• Keep packaging films away from children, there is a risk of
suffocation!
m WARNING
• According to applicable regulations, the appliance must
never be used on the drinking water net without a system
separator. Ensure that the connection of your building water
installation on which the high-pressure cleaner is operated
is equipped with a system separator pursuant to EN 12729
Type BA.
• Water that has flown through a system separator is no longer
classified as drinking water.
• High-pressure hoses, fixtures and couplings are important for
the safety of the appliance. Only use high-pressure hoses,
fixtures and couplings recommended by the manufacturer.
• When disconnecting the supply or high pressure hose, hot
water may leak from the connections after operation.
m CAUTION
• Mind the weight of the appliance when selecting the storage
location and during transport (see technical data) to prevent
accidents or injuries.
• Several hours of continuous use of the appliance can lead to
numbness in the hands in rare cases.
• Wear gloves.
• Keep hands warm.
• Take breaks at regular intervals.

Working with detergent

m WARNING
• This appliance was designed to be used with detergents
which are supplied or recommended by the manufacturer.
The use of other detergents or chemicals may compromise
the safety of the appliance.
• The improper use of detergents can cause severe injuries or
toxication.
• Store detergents away from the reach of children.
Safety Devices
m CAUTION
• Safety installations serve the protection of the user and may
not be modified or bypassed.
Personal protective equipment
m CAUTION
• Wear protective clothing and safety goggles to protect
against splash back containing water or dirt.
• During the use of high-pressure cleaners aerosols can devel-
op. Inhaling aerosols can cause health damage. Depending
on the application, completely shielded nozzles (e.g. surface
cleaner) that significantly reduce the emission of aqueous
aerosols can be used for high-pressure cleaning. The use of
such shielding is not possible with all applications. If the use
of a completely shielded nozzle is not possible, a respirator
of the category FFP 2 or the like should be used, depending
on the environment to be cleaned.

7. Residual risks

Even if you use this electric power tool in accord-
ance with instructions, certain residual risks cannot
be rules out. The following hazards may arise in
connection with the equipment's construction and
layout:
• Lung damage if no suitable protective dust mask is used.
• Damage to hearing if no suitable ear protection is used.
• Health damage caused by hand-arm vibrations if the equip-
ment is used over a prolonged period or is not properly
guided and maintained.

8. Technical Data

Mains voltage ...........................................230-240 V ~ / 50 Hz
Power input .....................................................................2400 W
Working pressure ............................................................12 MPa
Nominal pressure ............................................................18 MPa
Delivery rate ..................................................................5.5 l/min
Max. water inlet pressure ..............................................0.4 MPa
Protection class ............................................................................II
Weight ............................................................................. 10.1 kg
Protection category ............................................................... IPX5
Danger!
Sound and vibration
Sound and vibration values were measured in accordance with
EN 60335.
Sound pressure level L ................................................78 dB(A)
pA
Uncertainty K ................................................................ 3 dB(A)
pA
Sound power level L ..................................................94 db(A)
WA
Uncertainty K ............................................................... 3 dB(A)
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions) deter-
mined in accordance with EN 60335.
Vibration emission value ah ≤ 2,5 m/s
The specified vibration value was established in accordance
with a standardized testing method. It may change accord-
ing to how the electric equipment is used and may exceed the
specified value in exceptional circumstances.
The specified vibration value can be used to compare the
equipment with other electric power tools.
The specified vibration value can be used for initial assessment
of a harmful effect.
2
GB/IE/NI 15