Preparing For Use - Royal Catering RCST-9401 Manual De Instrucciones

3.2. Preparing for use

APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative
humidity should be less than 85%. Ensure good ventilation in the room in which
the device is being used. There should be at least 10 cm distance between each
side of the device and the wall or other objects. The device should always be used
when positioned on an even, stable, clean, fireproof and dry surface, and be out of
the reach of children and persons with limited mental and sensory functions.
Position the device such that you always have access to the power plug. The power
cord connected to the appliance must be properly grounded and correspond to the
technical details on the product label.
Disassemble the device and all its components and clean them before the first use.
ASSEMBLING THE DEVICE
3.3. Device use
1. Add 0.6 litres of water to the outer container before placing the inner container
insert into the warmer. Never over-fill with water. Under no circumstances should
the inner container float, ever when empty. Before use, remove excess water.
2. The internal container must be put in the external tank and then filled with the
desired foods.
3. Put the plug into the power socket.
4. Turn the soup kettle on. The indicator light will glow, showing that the unit is on.
Adjust the temperature control dial to the correct setting.