Installation - Agio 2127021 Manual Del Usuario

W
X
Y
Z
AA
BB
CC
DD
1. Carefully unpack all items from the box. Place the base in the final position. There must be a
minimum of 60.96 cm / 24 inches of clearance from the side of the table top to any combustible
walls.
2. Attach a leg connector bracket to a table leg by using two 1/4"x20 mm bolts and Ø6.5x1.0 mm
washers as shown in Figure 2. Guide the bolts through the holes in the leg connector bracket,
into the pre-drilled holes in the table leg. Hand tighten only 2-3 turns. Repeat for the other leg and
leg connector bracket.
FIREPIT TABLE TOP
FIREPIT BASE
FIREPIT TABLE LEG
LEG CONNECTOR BRACKET
BURNER PAN PROTECTIVE
RING
BURNER COVER
FIREPAN/BURNER
ASSEMBLY
ORIFICE HOLDER

INSTALLATION

Figure 2
6
FP3540 1
FP3541 1
FP3542 2
FP3543 2
FP3544 1
FP3545 1
FP3546 1
FP3573 1