Tabla De Contenido; Table Of Contents; Safety Information; Work Area Safety - Husky CUT20P Guía De Uso Y Cuidado

Table of Contents

Table of Contents ........................................................ 2
Safety Information ....................................................... 2
Work Area Safety .....................................................................2
Personal Safety ........................................................................2
Electrical Safety .......................................................................3
Fire Prevention .........................................................................4
Use and Care ............................................................................4
Electric Arc ...............................................................................5
Warranty ....................................................................... 5
3 Year Limited Warranty ..........................................................5

Safety Information

WORK AREA SAFETY

WARNING: Operating the machine without preparation
and caution can cause death, injury to yourself or
bystanders. To reduce the risks, the operator should read,
understand and follow the safety instructions. Bystanders in
the area should also follow the safety instructions under the
guidance of operator.
□
Ensure your work area is clean and well lit.

PERSONAL SAFETY

WARNING: Cutting processes generate high-temperature
arc, flying sparks, hot metal and hot spatters. Cutting arc
generates extremely intense ultraviolet and infrared light.
Failure to wear protective equipment during cutting can
severely damage your eyes and burn your skin. To reduce
the risks, the operator should read, understand and follow
the safety instructions. Bystanders in the area should also
follow the safety instructions under the guidance of
operator.
WARNING: Cutting processes generate fumes,
gases and vapors which can cause discomfort,
illness and death. To reduce the risks, the operator
should read, understand and follow the safety instructions.
Bystanders in the area should also follow the safety
instructions under the guidance of operator.
Pre-Operation ............................................................... 6
Specifications ..........................................................................6
Package Contents ....................................................................7
Operation Instruction................................................... 8
Maintenance ................................................................. 9
Troubleshooting ......................................................... 10
Service Parts .............................................................. 12
Assembly Diagram .................................................................12
□
Keep the machine on a stable and clean surface while
operating.
□
Keep children, bystanders and visitors away while operating
machine. Distractions can cause you to lose control.
□
Do not operate machines in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Flying
sparks during cutting may ignite the dust or fumes.
□
Do not leave energized machine unattended. Always turn off
the machine before servicing parts, replacing components or
when the machine is not in use.
□
Do not operate without proper protection. Flying sparks can
cause burn injury. Always wear protective clothing and face
shield. The intensive light of the electrical arc can also burn
skin. Ensure to wear closed-toe shoes, gloves and clothing
with heavy material, long sleeves and collar.
□
Do not look at an electric arc without proper eye protection.
An electric arc is extremely bright and intense which can
burn the eye retina and cause permanent damage when
equipped with inadequate or no eye protection.
□
Do not operate in a confined areas without adequate
ventilation. Otherwise, wear an air-supplied respirator.
2