Terraillon POWER STEPPER Manual De Instrucciones página 23

POWER STEPPER - INSTRUCTION MANUAL
Step 4 - Turn on the device
• Press the power button [
In the default setting.
• The screen displays [ ] 30 minutes, [
[ ] display 0000.
Step 5- Setting the treatment time
• Set the treatment time by using the
• The treatment time can be adjusted from 5 to 90 minutes.
Step 6 - Start treatment and adjust intensity
• Set the intensity level by using the
• The treatment will begin and the [
treatment.
CAUTION:
• Each person may require a different intensity level to obtain the optimal muscle stimulation.
• The device can safely be used on intensity level 1 to maximum level 99.
• If the stimulation levels are uncomfortable or become uncomfortable, reduce the stimulation
intensity to a comfortable level and contact your medical practitioner if problems persist.
• For safety purposes, this device was designed with load detection. If the electrode pads are
removed from the skin, an alarm buzzer will sound and the intensity value will return to zero
automatically.
Step 7 - Turn OFF the device
• Press the power button [
• If the device stop treatment (Intensity = 0),the device will be turned off automatically after 2
minutes.
• If the remote control is disconnected with the device, the remote control will be turned off
automatically after 1 minutes.
EN
Step 3 - Pad placement
• Remove the clear plastic film from the back of
the pad.
• Place pads on clean, dry and healthy skin near
or surrounding the target specific body areas
in order to relieve local pains and/or stimulate
precise muscles:
*Legs, thight, knees
*Shoulders, back, arms
* Hips, waist
] on the device or use the remote control.
] 00 output intensity, [
[ ] buttons on the remote control.
[ ] buttons on the remote control.
] display will start counting down the remaining minutes of
] on the device or hold 2s the ON/OFF button on remote control.
] 00 output intensity.
23