Terraillon POWER STEPPER Manual De Instrucciones página 24

SPECIFICATIONS
• Channel: 3 channels
• Power Supply:
Adaptor: input 100V- 240V ~, 50/60Hz; output: DC6V, 300mA;
Or DC 6.0V, 4*C battery (optional)
• Waveform: Bi-phasic waveform
• Frequency: 10Hz~36Hz
• Pulse Duration: 250µs for foot stimulation; 200µs for body stimulation
• Output Voltage: 0~80Vpp (at 500 ohm load)
• Treatment Time: 5~90 min
• Operating Conditions: 5°C to 40°C; 30%RH to 80%RH; 700hPa-1060hPa
• Storage Conditions: -10°C to 55°C; 10%RH to 90%RH; 700hPa-1060hPa
• Size: 416 x 380 x 104mm
• Weight: About 2100g (main device only, without batteries)
• Applied part: electrode pads and footpads
MAINTENANCE
• Do not immerse device in water or any liquid. Do not drop the device or throw it from a height.
• Pull out the mains plug of the mains adapter from the wall socket
• Remove from towel and allow to air dry at room temperature away from heat and sunlight.
CLEANING
CLEANING THE UNIT
• Turn unit off and disconnect the lead wires from the unit.
• Clean with a lightly moistened cloth (or a cloth soaked in a neutral cleaning solution) and wipe gently.
• Do not use chemicals (like thinner, benzene).
• Do not let water get into the internal area.
CLEANING THE ELECTRODE PADS
• Turn the power off and remove the lead wires from the pads.
•Wash the pads when the adhesive surface becomes dirty and/or the pads are difficult to attach.
24
POWER STEPPER - INSTRUCTION MANUAL
POWER
stepper
EN
POWER
stepper