SPORTSTECH WRX1000 Manual De Instrucciones página 43

Step 9
Remove the board (24) (25) from the frame with tools (148). Fix the L-plates to the pedal set using
flat head inverted edge screws (12) and nylon nuts (15). Fix the pedal sets vertically to the frame from
both sides using flat head inverted side screws (14) flat washers (13) and nylon nuts (15). Fix the rod
fixing sleeve (34) to the frame using fla head inverted side screws (35) and nylon nuts (15).
EN
Step 10
Use the tool (152) to fix the pull bar (26) to the frame. Fix the plank (24) and (25) to the frame with
the tool (148).
43