SPORTSTECH WRX1000 Manual De Instrucciones página 55

3. Bluetooth APP function
In standby mode you can conmnect the Bluetooth APP. Activate Bluetooth on the phone and open the
corresponding APP (Kinomap) to connect.
4. Display colour function
In standby mode, short press "
7 display colours will be automatically selected according to WATT/Heartrate. Press "
the colour selection.
C0: The display colour is related to WATT/Heartrate:
Blue : 1%-50%
Aqua : 50%-57%
Green : 58%-65%
Yellow : 66%-73%
Watt ---- if no pulse input
Blue : 1-100
Aqua :101-150
Green : 151-200
Yellow : 201-250
C 1: Blue
C 2: Aqua
C 3: Green
C 4: Yellow
Automatic startup and shutdown: When the user starts rowing or presses the start/stop key, the
display starts automatically. If the device has not been used for 4 minutes, the display automatically
switches to standby mode.
Notice:
1. For operation, the mains adaptor has to be connected with the cable. It is located near the water
tank at the frame's inner side. (Output values 12V, 3A)
2. Keep moisture away from the display.
", to select the display colour mode. By default, C0 is set: One of
Orange : 74%-81%
Red : 82%-89%
Magenta/Ultraviolet : 90+%
Orange : 251-300
Red : 301-350
Magenta/Ultraviolet : 351+%
C 5: Orange
C 6: Red
C 7: Magenta/Ultraviolet
55
" long to exit
EN