Console Manual - SPORTSTECH WRX1000 Manual De Instrucciones

KEY INSTRUCTION
COLOUR: In standby mode, press this key to enter the lamp colour
selection mode (C 0~C 7) press this key to confirm and return to standby
mode;
RECOVERY: This is the heart recovery key. After the user exercises
for a period of time, press this key and count down for one minute. When
the time is up, the display will evaluate the user's physical condition from
F1 through F6;
MODE: In standby mode, press to enter PROGRAM mode. Hold down for 3 seconds to return
to standby mode;
DOWN: Reduce value of each function (time/calorie/distance/target heart rate);
UP: Increase value of each function (time/calorie/distance/target heart rate);
LIGHT: Short press this key to turn on and off the light.
OPERATION INSTRUCTION
1. After the power supply is connected, the display starts up: the full display is shown, the buzzer
sounds, and then the bluetooth number and software version number are displayed. After 1 second,
the display enters the standby mode;
2. In standby mode, the user can directly pull the pull bar and start to exercise;
3. In standby mode, press "
target distance/target heart rate.
4. Press " " for 3 seconds to switch the display to standby mode;
5. Press " " to switch off illumination, press "

CONSOLE MANUAL

" to enter PROGRAM mode. You can set target time/target calorie/
" to switch it on again.
53
EN