Using The Appliance For The First Time; Setting The Grill; Setting The Oven - WMF PROFI PLUS URBAN MASTER GRILL Manual De Instrucciones

7| USING THE APPLIANCE FOR
THE FIRST TIME
Insert the mains plug into an earthed wall
•
socket that has been installed correctly.
Turn on the mains switch on the back of the
•
appliance.
The appliance is in standby mode and shows
„-: - -".
Turn = Set
1x toch = Active
2x toch = Set
Step 1:
Touching the relevant icon once switches the
display to this function. When the appliance is
switched on for the fi rst time, the display only
shows „-: - -".
Action Meaning
1x touch Touching the relevant icon once switches the display to this function.
2x touch Touching the icon twice within one second activates the settings option
(icon and indicator are fl ashing).
Turn the rotary knob Set the grill setting, oven temperature or time.
Hold (3 seconds) Switch off the corresponding function.
Press the mains switch The entire appliance is switched on or off.
Status indicator Meaning
Lights up red The appliance heats up or the timer is activated.
Lights up white The set temperature has been reached or the timer has run out.
Icon and display are fl ashing Settings can be performed.
Icon lights up continuously Function active
Step 2:
Touching an icon twice within one second acti-
vates the settings option (icon and indicator are
fl ashing).
Now the setting can be performed by turning
the rotary knob. If the rotary knob is not oper-
ated within 5 seconds, the appliance returns to
the initial state.
Step 3:
Touching the icon again or automatically after
4 seconds accepts the setting and activates the
function. The heating up or the countdown is
indicated by the red status indicator above the
icon and a signal tone.
Step 4:
As soon as the temperature/time is reached, the
status indicator above the icon changes color
from red to white and a signal tone sounds.
Cancel/Exit:
A function can be interrupted at any time by
touching and holding the icon.
32
Signal tone Meaning
3x signal tone The temperature has been reached or the timer has run out.
1x signal tone The setting performed was accepted.
1x signal tone when timer is The timer ends in 1 minute and the countdown on the timer is shown. It is
active now possible to reset the timer during the countdown or to simply let the
time run out.

7.1| SETTING THE GRILL

The grill is securely positioned horizontally on
its supporting legs and cannot tip over.
Remove the grill grates (6).
•
Fold the heating element (2) upwards.
•
Remove the refl ectors (7).
•
Insert the water/drip tray (8) and fi ll with
•
water to the "MAX" mark.
Note: If there is a lack of water, the grill func-
tion switches off automatically after a period
of time!
To resume operations, switch off the appli-
€
ance, leave to cool down and carefully
refi ll the water/drip tray with water.
Insert the refl ectors again.
•
Fold the heating element downwards.
•
Insert the grill grates.
•
Close the wind and splash guard.
•
Operate the appliance (see chapter "Using the
•
appliance for the fi rst time").
When the wind and splash guard is closed, the
current temperature is displayed in the cook-
ing chamber.
When the wind and splash guard is open, the
selected grill setting is displayed.
Always heat up the grill grates before putting
•
the food to be barbecued on the grill.
The grill setting can be set from 1 to 9 via the
•
rotary knob.
Corresponding temperatures for each grill
setting:
Grill setting Temperature approx.
1 100 °C
2 130 °C
3 160 °C
4 190 °C
5 220 °C
6 250 °C
7 280 °C
8 310 °C
9 340 °C
*Temperatures are approximate and depend on
various factors (input voltage, ambient temperature,
etc.).

7.2| SETTING THE OVEN

Operate the appliance (see chapter "Using the
•
appliance for the fi rst time").
The oven temperature can be set using the
•
rotary knob.
Oven temperature: 60°C to 200°C
33