Technical Specifications; Troubleshooting - WMF PROFI PLUS URBAN MASTER GRILL Manual De Instrucciones

9| TECHNICAL SPECIFICATIONS
Nominal voltage: 230 - 240 V~ 50 – 60 Hz
Power consumption: 2755 –3000 W
Protection class: I
IP class: IXP4
The appliance complies with European
directives 2014/35/EU, 2014/30/EU and
2009/125/EU
At the end of its life, this product must
not be disposed of in normal household
waste but must instead be delivered to a
collection point for recycling electrical and
electronic appliances. The materials are recycla-
ble in accordance with their labelling. By reus-
ing, recycling or other forms of reutilising old
appliances, you are making an important contri-
bution towards protecting our environment.
Please ask your local authorities for information
about the appropriate disposal point.
Subject to change
38

10| TROUBLESHOOTING

Display Cause
Lid The wind and splash guard (1) is neither fully
closed nor fully open for more than 60 seconds.
nP The grill grates (6) are not used or are not used
correctly.
drY The water/drip tray (8) is empty.
nt The core temperature thermometer (15) is not
plugged in or not plugged in correctly.
E01 Sensors in the lid defective
E02 Grill thermosensor defective
E03 Oven thermosensor defective
E04 Water detection sensor defective
Troubleshooting
Close the wind and splash guard (1) completely
or open it as far as it will go.
Check that the grill plates (6) are correctly
positioned.
Switch off the appliance and wait until all parts
have cooled down.
Refill the water/drip tray (8) with water.
Check the connection (16) and reconnect the
core temperature thermometer (15) with the
control panel (5).
Please contact our Customer Service
department.
39