While using
The remaining battery
capacity are shown and
then turn off after
5 seconds.
• Approximate amount of
battery capacity is
displayed.
When the battery capacity is low
The lowest battery capacity lamp glows when
operating the shaver.
The appliance beeps twice after switched off.
• You can shave 2 to 3 times. (This will differ
depending on usage.)
Notes
• The appliance may not operate in an ambient
temperature lower than approximately 5 °C.
• The shaving sensor may not respond depending on
the type and quantity of the shaving gel. This is not
abnormal.
• Depending on the beard thickness or the amount of
beard trimmings in the shaver head, the shaving
sensor may not react and the driving sound may not
change. This is not abnormal.
ES-LS6A_EU.indb
15
After use
The remaining battery
capacity blink and then
turn off after 5 seconds.
• To prevent erroneous operation, place your fingers on
the finger rest while using the shaver.
• The sonic vibration cleaning mode is activated when
the power switch is pressed for more than 2 seconds
while the shaver is not operating. (See page 16.)
You cannot shave in this mode.
Operation and display of the switch lock
►Locking the power switch
1. Press
once
2. Press
and then
more than
release.
2 seconds until
• The shaver
the switch lock
starts
lamp ( ) turns
operating.
on.
• The shaver will
stop operating.
►Unlocking the power switch
1. Press
for more than
2 seconds until the
switch lock lamp ( )
turns off.
for
3. Release
.
• The switch
lock lamp
( ) will
light up for
5 seconds
and turn
off.
2. Once the shaver starts
operating, release
.
• The switch lock lamp
( ) will turn off.
15
2021/12/07
20:44:01