Hilti HA EXO-O1 Manual De Instrucciones Original página 35

6.1 Adjusting assistance
1. If applicable, attach the magnetic adjusting knob to the articulation unit.
2. Adjust the assistance by turning the magnetic adjusting knob.
▶ Turn the knob clockwise (+) for more assistance, turn it counter-clockwise (-) for less assistance.
▶ The scale on the articulation unit is merely an indicator marking the position.
Assistance is correct when gravity is enough to make your arms drop, without further exertion on
your part. Do not attempt to set assistance to a value higher than this; any lower setting is
possible, in accordance with your preference.
3. Engaging the second expander is an option, if more assistance is necessary. → page 31
6.2 Engaging second expander
Step through the following procedure for each side of the exoskeleton in turn.
1. If applicable, remove the magnetic adjusting knob.
*2282599*
2282599 English 31