Descargar Imprimir esta página

Spectroline NANO 365 Serie Manual De Instrucciones

Publicidad

Enlaces rápidos

1.800.544.2843
English
NANO 365 SERIES UV-A LED LAMP INSPECTION KIT
Part No. IDX-100
INTRODUCTION
The Nano 365 Series IDX-100 Rechargeable UV-A LED Flashlight kit contains the
IDX-100 flashlight, a portable, versatile, lightweight light source.
UV light emitted from this product. Avoid eye and skin exposure
to unshielded products
FOR PROFESSIONAL EXAMINATION USE ONLY
IMPORTANT SAFETY INSTRUCTIONS (Read all instructions)
•Do not operate the IDX-100 if it has been damaged.
•Do not look directly into the light. ALWAYS wear the UV-absorbing protective
glasses provided when operating the flashlight. Use in low-light conditions to achieve
the best inspection results. The darker the room, the greater the fluorescent contrast.
•The IDX-100 is not approved for use in hazardous atmospheres. Do not attempt to
use it in areas requiring explosion-proof lighting.
•Never use this equipment in any manner not specified in these instructions because
your protection may be impaired.
•Do not attempt to modify the lens assembly or light output. Doing so may alter the
performance and intensity of the IDX-100 and render the item out of compliance.
FEATURES
•Instant on operation, reaches full UV-A intensity immediately.
•Lamp is equipped with antioxidant blacklight filter glass to minimize the visible
light and increase the UV light.
•Anodized aluminum flashlight body to minimize corrosion and maximize years of
heavy use.
•Charged by USB-C cable and powered by one rechargeable lithium-ion battery
TECHNICAL SPECIFICATIONS
Length...................................................................................................6.25''(15.9 cm)
Lamp Head Diameter...............................................................................1.3''(3.3 cm)
Weight................................................................4.93 oz (140 grams) (without battery)
Light Source...................................................................................One (1) UV-A LED
Power Requirement....................................One (1) Rechargeable Lithium Ion Battery
Continuous Run Time..................................................................................2 Hours
Power Input...........................................................................................2.8 to 4.2 Volts
KIT COMPONENTS
Unpack and inspect the components for possible damage in shipment. If any damage
or missing parts are noted, immediately notify the carrier and supplier, and do not
use the light source.
1)Nano 365 Series IDX-100 Flashlight
2)Rechargeable Li-Ion Battery
3)5V Power Adapter
3)USB Type C Charging Cable
4)Lanyard
5)O-ring (2)
5)Belt Holster
6)Storage Box
www.calcert.com
15
10
20
5
25
0
30
WARNING
sales@calcert.com

Publicidad

loading

Resumen de contenidos para Spectroline NANO 365 Serie

  • Página 1 English NANO 365 SERIES UV-A LED LAMP INSPECTION KIT Part No. IDX-100 INTRODUCTION The Nano 365 Series IDX-100 Rechargeable UV-A LED Flashlight kit contains the IDX-100 flashlight, a portable, versatile, lightweight light source. WARNING UV light emitted from this product. Avoid eye and skin exposure to unshielded products FOR PROFESSIONAL EXAMINATION USE ONLY IMPORTANT SAFETY INSTRUCTIONS (Read all instructions)
  • Página 2 CHARGING AND USE •The IDX-100 is shipped factory set at the specified intensity for optimal performance during inspections. •Turn flashlight upside down, unscrew and remove tail cap from housing and place included Li-Ion battery positive end towards head of flashlight. Attach provided lanyard to tail cap.

Este manual también es adecuado para:

Idx-100