Important; Control Panel; Temperature Control - Masterpro FOODIES Serie Manual De Instrucciones

EN

IMPORTANT

Check all included parts and accessories carefully before use. If any part is missing or
damaged do not use the product, but contact customer service immediately.
WARNING
Forks, skewers, and other metal parts within this unit are sharp and will get extremely
hot during use. Great care should be taken to avoid personal injury. Wear oven mitts or
gloves .

CONTROL PANEL

1. LED Digital Display
The digital display shows both the time and temperature settings. During cooking, the
display will switch between set temperature and time remaining. Otherwise, it will
display your timer or temperature options while setting them.
17
2. Cooking Presets
Selecting any of these will set the time and temperature automatically to a default
setting for that particular food. You may override these presets with the time and
temperature settings (2 & 3). It is important to note that the dehydrating preset will
operate differently in dehydrating mode, the temperature range is limited between
30°C and 80°C.

3. Temperature Control

These buttons enable you to raise or lower the cooking temperature in 5°C increments,
from 65°C to 200°C. You can adjust the temperature setting while the unit is actively
cooking. In dehydrating mode, the temperature range is limited between 30°C and
80°C.
4. Timer Control
These buttons enable you to raise or lower the cooking time in one minute increments,
up to 60minutes. You can adjust the timer setting while the unit is actively cooking.
In dehydrating mode, the timer can be set between 2 and 24 hours, changed in 30
minute increment.
5. lnternal Light
Press this button to turn on the light inside of the unit While the unit is running, the
light should help.
Note: If the door is opened, the light will illuminate either way. Note also that opening
the door pauses the cooking process.
6. Power/Start-Stop Button
Once the unit is plugged in, the power button will light up. Pressing the power button
whole panel, allowing you to start cooking and change your settings. Pressing the
power button a second time (without changing any settings)will start the cooking
process at the default temperature of 185°C and default time of 15 minutes. Pressing
the power button at any time during the cooking process will turn off the display and
put the unit in cool down mode for 20 seconds.
7. Rotisserie Function
Pressing this button will begin rotisserie rotation.
Press it again to turn the rotisserie off again.
18
EN