Electromagnetic Fields(Emf) - Masterpro FOODIES Serie Manual De Instrucciones

EN

ELECTROMAGNETIC FIELDS(EMF)

This appliance complies with all standards regarding electromagnetic fields(EMF). If
handled properly and according to the instructions in this user manual, the appliance
will be safe to use based on the scientific evidence available today.
AIR FRYER PARTS & ACCESSORIES
1. Rotating Basket
The rotating basket is great for fries and roasted nuts, as it
helps cook the food evenly without having to flip or turn it
manually. Use the rotisserie"grabber" tool to remove the
rotating basket safely.
2 & 3. Rotisserie Chicken Fork & Rotisserie Shaft
Use the rotisserie fork and shaft for roasts and whole
chickens. Force the shaft lengthwise through the center of
the meat. Slide the forks onto the shaft from either end into
the meat, then lock them in place with the set screws. There
are indentations on the shaft for the set screws to screw
into. You can adjust the screws closer to the middle of the
shaft if needed, but never outward towards the ends of the
shaft. NOTE: Make sure the roast or chicken is not too large
to rotate freely within the air fryer. The maximum size roast
will be roughly 4.5 to 5 pounds.
4. Rotisserie ''Grabber" Tool
Use the rotisserie "grabber" tool to remove cooked roasts
and chicken that have been prepared using the rotisserie
shaft and/or chicken forks, or anything else that you cannot
remove by hand with an oven mitt. Place the ends of the
"grabber" under the rotisserie shaft, then lift the left side,
then the right side slowly removing the shaft from the
rotisserie slot and pulling your food out of the oven.
15
5 & 6. Skewer Racks & Skewers
The skewers are great for making kabobs of any kind.
To assemble, attach the skewer racks to the rotisserie shaft
using the set screws on the racks. There are indentations on
the shaft for the set screws to screw into. You can adjust the
screws closer to the middle of the shaft if needed, but never
outward towards the ends of the shaft. Insert the skewers
through each of the skewer rack openings, making sure
that the skewer is parallel to the rotisserie shaft.
FINAL ASSEMBLY
FRONTAL VIEW SKEWER RACKS
SET SCREW
LEFT SIDE
7. Oil Drip Tray
The oil drip tray will catch any oil or scraps that fall from the
cooking food. Once completely cool, the drip tray can be
removed from the air fryer and cleaned. As long as the drip
ray is inside the unit during cooking, it will be much easier
to keep the inside of your air fryer clean.
8. Cooking / Dehydrating Racks
These racks serve as your primary cooking trays, but can be
used for dehydrating as well. (See below for dehydrating
instructions). These racks allow you to cook multiple trays of
food at the same time, and they help circulate the air well.
Please make sure that your air fryer has been shipped with
the necessary components. Any accessory marked "sold
separately"must be purchased separately from the manu-
facturer Contact customer service if you have any questions
about purchasing accessories.
SET SCREW
ROTISSERIE SHAFT
RIGHT SIDE
16
EN