English
Charger features
• Wirelessly charges Qi-certified devices.
• Certified according to specification
Qi 1.2.4BPP.
• Temperature and power monitor
for safety.
• LED status indicator.
Instructions for use
• Connect the charger cable to the
power adapter and plug it into the wall
socket.
• For wireless charging, place the device
to be charged on top of the plus sign
(+) on the desk. The device must be
placed directly over the plus sign (+)
on the desk for the charging function
to work optimally. Note that on some
devices you may have to activate
wireless charging in settings.
• If your battery is completely
discharged, it may take a few minutes
before it starts charging. This is
entirely normal. You can see that the
battery has begun charging when
the battery symbol appears on your
device.
LED indicator (see illustrations):
1. Power on: LED lights up for
3 seconds.
2. Charging: LED on.
3. Charging completed: LED off.
4. Error: LED flashes.
Good to know
• The distance between device and
charger should be minimum 8 mm
and maximum 22 mm, or the charger
will not start charging.
• Charging function works through
every material except metal.
• The distance between the charger
and any metal object (such as a
table frame) must be at least 30 mm,
otherwise charging will not start and
the LED will start flashing to indicate
an error.
• Mobile phone cases containing metal
or magnetic components will interfere
with the charging function and must
therefore be removed before charging.
• Devices may get warm during
charging; this is completely normal
and they will gradually cool down
again after they are fully charged.
• Charging time may vary based on
the device's battery capacity, charge
level, the age of the battery and the
temperature in the surrounding area.
• Charger storage temperature:
-20 °C to 25° C (-4 °F to 77° F).
• Charger operating temperature:
0 °C to 40 °C (32 ˚F to 104 ˚F).
• Unplug the charger from the power
source before cleaning and when it is
not in use.
18