HumanTechnik Signolux T Instrucciones De Servicio página 10

We would like to congratulate you on pur-
chasing the modern and reliable »signolux«
alerting system. Please read the user manu-
al carefully for the proper use of the device
and so that you can familiarise yourself with
all the possibilities this system offers.
Scope of Delivery
Kindly check if all following parts are in-
cluded:
- »signolux«-Receiver T
- 4 rechargeable batteries size AAA
- Power supply unit
- User manual
– Warranty card
Should any parts be missing, kindly contact
your specialist dealer or the manufacturer
directly.
How it works
A »signolux« alerting system consists of at
least one transmitter (e.g. doorbell pushbut-
ton) and a receiver. Up to 8 transmitters can
be assigned to each event icon.
If e.g. the doorbell pushbutton is pressed,
a radio signal is transmitted to the receiver.
This, in turn, displays the received signal
audibly and visually with sounds and flash-
ing lights.
Safety instructions
- Prior to putting the device into operation
and using it, please read this manual
thoroughly.
- Keep this manual in a safe place so that
it is also accessible for other users at any
time.
10 English
Setup
Inserting the rechargeable batteries
The battery compartment is located on
the underside. Press the latches of the
battery compartment cover slightly to-
wards the center of the bottom of the
device and lift the cover off.
Now insert the 4 supplied rechargeable
batteries. Make sure they are inserted in the
correct direction according to the markings.
Close the battery compartment by replacing
the cover and pressing it shut.
Connect the power supply unit. The char-
ging time is approx. 6 hours.