HumanTechnik Signolux T Instrucciones De Servicio página 11

Display and features
1. Flashing zone
2. Event icons
3. Function button
4. Status LED
5. Melody button
Setting the alerting mode
Using the mode selector switch (9) you can
select the alerting mode.
Please keep in mind that the event icons are
always indicated.
– switch to position 0:
alerting tones, but no flash
– switch to position 1:
alerting tones and flash
– switch to position 2:
no alerting tones, flash only
6. Speaker
7. Volume control
8. AUX output for modules
9. Mode selector switch
10. Connector for 7,5 V power supply unit
Setting the volume
Use the rotating volume control to set the
volume of the alerting tone.
Warning:
This device can generate sounds of up to
90 dB!
In order to protect your hearing, please set
a low volume to begin with and only then
adjust it to the desired volume.
English 11