VONROC S4 LM505DC Traducción Del Manual Original página 18

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 55
EN
speed (walking speed). To adjust the area coverage to
your individual requirements, it is recommended that
you mow the lawn more often, with a higher cutting
height and at an appropriate speed. Frequently
turning the equipment on and off while mowing will
also reduce the amount of area that you can cover. If
the operating time of the rechargeable batteries (area
coverage) is still unsatisfactory in spite of the above
measures, you can remedy the problem by using
rechargeable batteries with a larger capacity (Ah).
After use
1. After use, switch the product off, disconnect the
safety key (21).
2. Remove the battery packs (23).
3. Check, clean and store the product as described
in chapter 'maintenance'.
5. MAINTENANCE
Switch off the equipment, wait for the blade
to stop and remove the battery. There is
a risk of injury.
Cleaning
Your mower has been designed to operate over
a long period of time with minimum of mainte-
nance. Continuous satisfactory operation depends
upon proper mower care and regular cleaning.
• Keep the mower clean and dry.
• Regularly use a blunt scraper to remove grass
and dirt from the mower
• To clean the mower, use only mild soap and
a damp cloth. Never let any liquid get inside
the tool and never immerse any part of the tool
into liquid. Do not use any abrasive or solvent -
based cleaner.
Stop the blade(s) if the machine has to be tilted for
transportation when crossing surfaces other than
grass, and when transporting the machine to and
from the area to be used. Do not start the machine
when standing in front of the discharge opening.
Storage
Always allow the machine to cool down before stor-
ing. Replace worn or damaged parts for safety. Use
only genuine replacement parts and accessories.
1. Switch the product off, disconnect the safety key
(21) and remove the battery pack (23) before
storage.
18
2. Clean the product as described above.
3. Store the product and its accessories in a dark,
dry, frost-free, well-ventilated place. The ideal
storage temperature is between 10 °C and 30 °C.
4. Always store the product in a place that is inac-
cessible to children.
5. We recommend using the original package for
storage or covering the product with a suitable
cloth or enclosure to protect it against dust.
Transportation
1. Switch the product off, disconnect the safety
key (21) and remove the battery pack (23)
before transporting it anywhere.
2. Always transport the product by its transport
handle (7).
3. Protect the product from any heavy impact or
strong vibrations which may occur during trans-
portation in vehicles.
4. Secure the product to prevent it from slipping or
falling over, damage and injury.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/EC
for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that
are no longer usable must be collected separately
and disposed of in an environmentally friendly way.
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this
guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
WWW.VONROC.COM

Publicidad

Tabla de contenido
loading

Tabla de contenido