How To Change The Stimulation Intensity - Dogtra 4500 EDGE Manual De Instrucciones

8. HOW TO CHANGE THE STIMULATION INTENSITY

The Dogtra 4500 EDGE has the ability to switch between the rheostat/
volume intensity and the selector/step intensity.
The 4500 EDGE unit comes installed with the rheostat dial knob in
place. To switch to the selector/step dial, follow the steps below.
1. Turn the stimulation level to 0.
2. Unscrew the top of the dial with a flathead screwdriver counter-
clockwise.
3. Remove the current dial knob and replace with the desired intensity
dial type.
4. While firmly holding the dial knob in place, tighten the screw
clockwise.
Next, change the program setting to the corresponding intensity dial
type.
51