How To Change The Length Of The Contact Points - Dogtra 4500 EDGE Manual De Instrucciones

12. HOW TO CHANGE THE LENGTH OF THE CONTACT POINTS

The Dogtra 4500 EDGE comes equipped with standard 15mm contact
points that can be extended to 19mm contact points, for use with dogs
with longer coats.
To increase the contact point length from 15mm to 19mm, follow the
steps below.
1. Using the included adjustment tool with the side marked 5/8",
unscrew the contact points counter-clockwise.
down.
3. Place the contact points over the extensions and tighten the contact
points and extensions clockwise using the adjustment tool with the
side marked 3/4".
To shorten the contact points back to the standard 15mm, start with the
adjustment tool with the side marked 3/4", remove the contact point
extensions, and tighten the contact points with the adjustment tool with
the side marked 5/8".
55