Accounts & Sign In - Panasonic TX-43LX650E Manual De Funcionamiento

be able to configure these settings before the scan. If
Channel Installation Mode is set to Preferred Satel-
lite this option may be named differently depending on
the available services. Highlight the satellite and press
OK button to configure detailed satellite parameters.
Then press the Back/Return button to return to the
satellite selection screen. Highlight Next and press
OK to proceed.
Satellite Manual Tuning: Start a manual satellite scan.
Highlight the satellite and press OK button to configure
detailed satellite parameters. Then highlight Next and
press OK to proceed.
Favourite Network Select: Select your favourite net-
work. This menu option will be active, if more than one
network is available. This option may not be available
depending on the selected country during the initial
setup process.
Channel Skip: Set channels to be skipped when
switching the channels via Programme +/- buttons
on the remote. Highlight the desired channel/s on the
list and press OK to select/unselect.
Channel Swap: Replace the positions of the two
selected channels in the channel list. Highlight the
desired channels on the list and press OK to select.
When the second channel is selected, the position of
this channel will be replaced with the position of the
first selected channel. You can press the Yellow button
and enter the number of the channel you want to select.
Then highlight OK and press OK to go to that channel.
Channel Move: Move a channel to the position of
another channel. Highlight the channel you want to
move and press OK to select. Then do the same for a
second channel. When the second channel is selected,
you can press the Blue button and the first selected
channel will be moved to the position of that channel.
You can press the Yellow button and enter the number
of the channel you want to select. Then highlight OK
and press OK to go to that channel.
Channel Edit: Edit channels in the channel list. Edit
the name and channel number of the selected channel
and display Network Name, Channel Type and Fre-
quency information related to that channel if available.
Depending on the channel other options may also be
editable. Press OK or the Yellow button to edit the
highlighted channel. You can press the Blue button
to delete the highlighted channel.
Channel Delete: Highlight the desired channel/s on
the list and press OK or the Yellow button to select/
unselect. Then press the Blue button to delete the
selected channel/s.
Clear Channel List: Delete all channels stored in the
channel list. A dialogue will be displayed for confirma-
tion. Highlight OK and press OK button to proceed.
Highlight Cancel and press OK to cancel.
Note: Some options may not be available and appear as
greyed out depending on the operator selection and operator
related settings.
Channel Installation Mode
Set this option as Preferred Satellite or General
Satellite. The channel list will also change depending
on the selected option here. In order to watch the
channels on the satellite you want, this option should
be selected accordingly. Set to Preferred Satellite
to watch operator channels, if you have performed
an operator installation. Set to General Satellite to
watch other satellite channels, if you have performed
a normal installation.
Auto Channel Update
Turn the auto channel update function on or off.
Channel Update Message
Turn the channel update message function on or off.
Parental Controls
(*) To enter this menu PIN should be entered first. Use the PIN
that you have defined during the initial setup process. If you have
changed the PIN after the initial setup use that PIN.
set a PIN during the initial setup, you can use the default PIN.
The default PIN is 1234.
vary depending on the country selection during the initial setup.
The content of this menu may not be displayed if the channel
installation is not completed and no channels are installed.
Channels Blocked: Select channel/s to be blocked
from the channel list. Highlight a channel and press
OK to select/unselect. To watch a blocked channel PIN
should be entered first.
Programme Restrictions: Block programmes ac-
cording to the age rating information that is being
broadcasted with them. You can turn on or off restric-
tions, set rating systems, age limits, and block unrated
programmes using the options of this menu.
Inputs Blocked: Prevent access to the selected input
source content. Highlight the desired input option and
press OK to select/unselect. To switch to a blocked
input source PIN should be entered first.
Change PIN: Change the PIN you defined during the
initial setup. Highlight this option and press OK. You
will need to enter the current PIN first. Then new PIN
entry screen will be displayed. Enter the new PIN twice
for confirmation.
Open Source Licences
Display Open Source Software licence information.
Accounts & Sign In
Highlight this option and press OK to
Google account. Following options will be available if
you have signed into your Google account.
Google: You can configure your data syncing
preferences or remove your registered account on the
English - 18 -
Some options may not be available or
sign into your
If you didn't