Scan Mode Setting; Keypad Lock (Ky); Fm Radio And Moni Function (Dw); Auto Power Off (Apo) - Dynascan V-440 Manual De Instrucciones

Transceptor portatil fm vhf para radioaficionados
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3.- Press [PTT] to confirm and return to the main menu, press [FUN] key to save the changes and
exit to main menu (the original setting is 60 seconds).

7.8.- SCAN MODE SETTING:

1.- Press [FUN] key to enter the main menu, use the [UP] / [DOWN] keys or turn the channel knob
until display the menu 8, the LCD will display "SCA 08?".
2.- Press [PTT] to enter the menu, use the [UP] / [DOWN] keys or turn the
channel knob to select "TO", "SE" or "CO".
3.- Press [PTT] to confirm and return to the main menu, press [FUN] key to
save the changes and exit to main menu (the original setting is TO).

7.9.- KEYPAD LOCK (KY):

This function is to prevent any accidental operation of the transceiver. There are two ways to lock
the keypad: automatic and manual mode.
Manual mode:
1. Press [FUN] key to enter the main menu, use the [UP] / [DOWN] keys or
turn the channel knob until display the menu 9, the LCD will display "KY
09?".
2.- Press [PTT] to enter the menu, use the [UP] / [DOWN] keys or turn the
channel knob to select "MANU" or "AUTO".
3.- Press [PTT] to confirm and return to the main menu, press [FUN] key to save the changes and
exit to main menu (the original setting is MANU).
7.10.- FM RADIO AND MONI DUNCTION (DW):
If the FM radio function is on, when a signal is received, the FM radio will stop and the transceiver
will change to receive mode. After 5 seconds, the FM radio function will reactivate automatically. If
the monitor function is disabled and the FM radio is on, the signals from other transceivers can't be
received.
1.- Press [FUN] key to enter the main menu, use the [UP] / [DOWN] keys
or turn the channel knob until display the menu 10, the LCD will display
"DW 10?".
2.- Press [PTT] to enter the menu, use the [UP] / [DOWN] keys or turn the
channel knob to select "ON".
3.- Press [PTT] to confirm and return to the main menu, press [FUN] key to save the changes and
exit to main menu (the original setting is ON).

7.11.- AUTO POWER OFF (APO):

The APO function turns off the transceiver automatically if it hasn't been used for a period of time.
When it powers off, the transceiver emits an audible alert and the display will show flashing
"POWER OFF".
1.- Press [FUN] key to enter the main menu, use the [UP] / [DOWN] keys
or turn the channel knob until display the menu 11, the LCD will display
"APO 11?".
2.- Press [PTT] to enter the menu, use the [UP] / [DOWN] keys or turn the
channel knob to select "OFF", "30 seconds", "60 seconds", "120 seconds" or "240 seconds".
English - 16 -

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido