auna Blaster DAB Manual De Instrucciones página 30

EN
30
FM radio settings
You can only see the FM radio settings when you have selected 'FM' as the
radio source.
FM stereo option
You can choose between stereo or mono reception when listening to FM
radio. Mono may improve clarity where stereo signals are weak.
To change between Stereo or Mono reception:
1. Press hold the Menu Button for 2 seconds to view the main menu.
2. Press ▲ or ▼and Select to choose 'Audio Setting'.
3. Select between 'Stereo Allowed' or 'Forced Mono'.
FM scan
You can choose whether automatically stops at the next available FM
station or the next available FM station with a strong signal when scanning
for an FM station. To change the FM scan setting:
1. Press hold the Menu Button for 2 seconds to view the main menu.
2. Press ▲ or ▼ and Select to choose 'Scan Setting'
3. Select between 'Strong Stations Only' or 'All Stations'.
LED light show
• The LED LIGHT SHOW at the speaker of the unit is created automatically
based on the music source being played.
• Turn on the LED LIGHT button to auto/demo/off.
Note: If the brightness is too high, turn on the room lights or turn off the
LED LIGHT. LED LIGHT works in BT mode.
VOLUME + /-button
Adjusting volume : Turn the Volume +/- button to adjust the volume.