Bosch sensixx B35L Instrucciones De Uso página 12

All manuals and user guides at all-guides.com
en
Description
1. Removable water tank
2. Removable iron pad
3. "Water empty" / "Clean warning" pilot light
4. "Steam ready" / "Auto shut-off" pilot light
5. Variable steam control*
6. "Energy saving" button*
7. Steam hose
8. Illuminated main power 0/I button
9. Housing with internal steam generator
10. Mains plug
11. Mains cable with storage facility
12. Cord clip*
13. Temperature dial
14. Iron pilot light
15. Iron steam release button
16. Steam button lock*
17. Soleplate
* Depending on the model
Preparations (A)
1. Remove any label or protective covering from the
soleplate.
2. Place the appliance horizontally on a solid, stable
surface. You may remove the iron pad from the
appliance and place the iron on it on another solid,
stable, horizontal surface.
3. Remove the detachable water tank (1) and fill it,
making sure not to pass the level mark.
4. Fit the water tank back onto the steam tank.
5. Unwind the mains cable (11) fully and plug it into an
earthed socket.
6. Set the main power button (8) to the "I" position.
7. The "Steam ready" indicator lamp (4) will light up
after several minutes, indicating that the appliance
is ready to use.
The steam generator will take more time to reach
"Steam ready" state only upon the initial heating up,
or after performing the de-scaling operation (Calc'n
clean).
When water is already present in the steam
generator during regular use, heat up time to reach
the operating temperature will be faster.
8. This appliance has a built-in water level sensor. The
"refill water tank" indicator (3) will light when the
water tank is empty.
12
Important:
• Normal tap water can be used.
To prolong the optimum steam function, mix tap
water with distilled water 1:1. If the tap water in
your district is very hard, mix tap water with distille
water 1:2.
You can inquire about the water hardness with your
local water supplier.
• The water tank can be filled at any time while using
the appliance.
• To avoid damage and/or contamination of the water
tank and the boiler, do not put perfume, vinegar,
starch, descaling agents, additives or any other type
of chemical product into the water tank.
Any damage caused by the use of the
aforementioned products, will make the
guarantee void.
• The iron is not designed to rest on its heal. Please
always position it horizontally on the iron pad (2).
• The iron pad can be placed into the specially de-
signed recess on the appliance or somewhere suit-
able alongside the ironing area.
Never rest the iron on the appliance without
the iron pad!.
• During it first use the iron may produce certain
vapours and odours, along with white particles on
the soleplate, this is normal and it will stop after a
few minutes
• While the steam release button is pressed, the water
tank may produce a pumping sound, this is normal,
indicating that water is being pumped to the steam
tank.
Setting the temperature
1. Check the ironing instruction label on the garment to
determine the correct ironing temperature.
2. Turn the temperature selector (13) to the required
setting:
•
••
•••
3. The indicator lamp (14) will remain lit while the iron
heating and go out as soon as the iron has reached
the selected temperature.
Tips:
• Sort your garments out based on their cleaning
symbol labels, always starting with clothes that have
to be ironed at the lowest temperatures.
• If you are not sure what the garment is made of then
begin ironing at a low temperature and decide on
Synthetics
Silk – Wool
Cotton – Linen
A
T
T