Cata PR6011 XGBK Instrucciones De Uso Y Mantenimiento página 29

Note: The clock is 24 hours. After power on, if not set, the
clock will show " 0:00 ".
2. Function Setting
1> Rotate " K1 " to choose the cooking function you
require. The related symbol will illuminated.
2> Rotate " K2 " to adjust the temperature.
3> Press " " to confirm the start of cooking.
4> If step 2 is ignored, Press "
cooking and the default time is 9 hours, the default
temperature will display on the LED.
NOTE:
1> The step quantities for the adjustment time of the
knobs are as follow: 0--0:30min: step 1 minute
0:30--9:00 hour: step 5 minutes
2> The step quantities for the adjustment of temperature
is 5°C, and the radiant grilling function is 30°C.
3> Rotate " K1 " to adjust the cooking time when cooking
begins. Then press "
pressed within 3 seconds, the oven will revert back to
the previous time to continue cooking.
4> Rotate" K2 " to adjust the temperature when cooking
begins. The related indicator will be illuminated. Then
press" " to start cooking. If "
3seconds, the oven will revert back to the previous
temperature to continue cooking.
3. Lamp Setting
1> Rotate" K1 " to select the relevant function, then the
corresponding icon will be on.
2> Press " " button to start, " 0:00 " and lamp icon"
will light up, ": " flashes.
4. Inquiring Function
In the following states, you can use inquiring function,
after 3 seconds return to the current state.
1> During working state, if the clock was set, press "
button to see the current time; if the reminder
function was set, press "
reminder.
2> In reminding state, if the clock was set, press "
button to see the current time.
3> In clock display state, if the reservation function was
set, press " " button to see the time of reservation.
5. Child lock Function
To Lock: press " " and "
3 seconds, there will be a long " beeping " sound and the
" " will be illuminated.
" to confirm the start of
" to confirm. If " " not
" not pressed in
" button to see the time of
" simultaneously for
Lock quitting: press "
3 seconds, there will be a long " beeping " sound indicating
the child-lock is released.
Note: During working mode, if you want to stop cooking,
press stop button quickly. Do not need to long pressing on
stop button, it is invalid.
6. Reminder Function
This function will help to remind you to start cooking in a
certain time from 0:01 to 9:59.
Only when oven in standby mode, the reminder can be set.
Follow below to set the reminder:
1> Press reminder setting button "
2> Rotate " K2 " to set the hour time of reminder.
(Time should be within 0--9).
3> Press reminder setting button "
4> Rotate " K2 " to set minute time of reminder.
(Time should be within 0--59).
5> Press " " to confirm setting. The time will count
down.
Note: The oven buzzer will sound for 10 times after the
time back to the zero hour.
You can cancel the reminder during setting by pressing
the stop button; After the reminder has been set, you can
cancel it by pressing stop button twice.
7. Start/Pause/Cancel Function
1> If the cooking time has been set, press "
cooking.
If the cooking is paused, press "
cooking.
2> During cooking process, press "
"
the cooking.
Press " " twice to cancel the cooking.
8. Energy-Saving Function
1> In waiting state and reminding state, press "
three seconds, the LED display will go off and set to
energy-saving mode.
"
2> If no operation in10 minutes under waiting state, the
LED display will go off and go into energy-saving
mode.
3> Under the energy-saving mode, press any key or
rotate any knob can quit the energy-saving mode.
"
9. Pyrolytic Function
This function allows you to clean thoroughly the oven
cavity.
1> Rotate " K1" to select the pyrolytic function. LED will
display " PyR ".
2> Press " " to confirm the cooking. And the default
time is 2 hours, " PyR " will display on the LED.
3> Rotate " K1" to change the pyrolytic time. The timer
can be set 1:30 or 2:00 hours.
EN-4
" and " " simultaneously for
";
" again;
" to resume
" once to pause
" to start
" for