Publicidad
CHARGING AND USE
•The IDX-500 is shipped factory set at the specified intensity for
optimal performance during inspections.
•Turn flashlight upside down and unscrew and remove tail cap from
housing and place included Li-Ion battery positive end towards head of flashlight.
Attach provided lanyard to tail cap.
•Replace tail cap by screwing into flashlight housing.
•Below the lamp head of flashlight is USB-C charging port, connect provided
Type-C cable into flashlight and opposite end into provided 5V Power Adapter.
•The flashlight's charging indicator light displays red when charging and green when
fully charged. disconnect flashlight from USB Type C Cable when charging is complete.
•The IDX-500 has one button (on and off). Prior to using the unit,
ensure that the button is in the OFF position (no light illuminating
from the flashlight). Press the tail button once for UV Light, Instant-on
operation ensures that the lights will reach full intensity very quickly. Check to
see if the unit is operating optimally and press tail button to turn flashlight off.
UV INTENSITY VERIFICATION
To ensure that your IDX-100 flashlight is operating at the required
UV intensity, it should be checked periodically. The AccuMAX ™ XRP-3000
radiometer/photometer kit uses a UV-A sensor detector to accurately measure
ultraviolet irradiance. For more information about these units, please contact the
Customer Service Department at Spectro-UV. Call toll-free 1-866-230-7305.
CARE AND MAINTENANCE OF FLASHLIGHT
•It is suggested to regularly replace or lubricate the included O-ring and
screw thread to ensure seal and smooth tail cap removal and replacement.
•Turn
off
flashlight
and
ensure
unit
is
cool
before
cleaning filter glass. Please use lens tissue, or non-dust cloth for cleaning.
•For long term storage remove battery from flashlight.
•Be sure to use genuine Nano 365 Series replacement parts. Using another
manufacturer's parts could affect product performance and will void the lamp's warranty.
CARE AND USE OF LITHIUM ION (Li-ion) BATTERIES
•Do not allow Li-ion batteries to fully discharge frequently, since this will put a
strain on the batteries. They will work more efficiently on multiple partial
dischargesthrough regular use (every 2-3 weeks), and frequent recharges.
•When not in use remove the batteries from the flashlight and store separately.
•Before prolonged storage (30 days or more), charge the battery for at least two
hours. Store partially charged for best results.
•Store in a cool environment away from sunlight, heat and humidity. Store
the battery at temperatures between 5 °C and 20 °C (41 °F and 68 °F).
•The
battery
self-discharges
during
storage.
Higher
temperatures
(above 20 °C or 68 °F) will reduce the battery storage life.
•Lithium-Ion batteries are subject to disposal and recycling regulations that vary by
country and region. Always check and follow your applicable regulations before
disposing of any battery.
WARRANTY
The
warranty
policy
for
the
IDX-500
is
provided
on
the
Certificate of Limited Warranty enclosed separately with each unit. The part
number and serial number for your item is located on the inside of the tail cap.
GlobalTestSupply
www.
.com
Find Quality Products Online at:
sales@GlobalTestSupply.com
Publicidad
