M7 PA-111 Manual De Instrucciones página 3

Warning:
1. This tool should only be used as a hand operated tool. It is powered by compressed air and is not
insulated against electric shock.
2. This tool is specially designed for riveting sheet metals together. Any application or use of this tool other
than what it is designed for is strictly prohibited.
3. High sound levels may cause hearing damage. Always wear hearing protection when operating this tool.
4. Wearing eye/face protection can reduce the danger of high-speed materials being ejected from tool use.
5. User must wear proper clothing. Loose clothing, long hair, stings, straps, belts and jewelry should not be
worn when operating this tool.
6. Make sure that the all the specifications of the rivets to be used are compatible with this tool.
7. Check the protection against the ejecting of rivet stem in place and is operative.
8. Make certain to stand on a solid or firm location and keep body in well-balanced position while operating
this tool.
9. Always turn off the air supply and disconnect the air hose before changing rivet nose or making
adjustments on this tool.
10.Release the throttle lever to avoid danger if there is a failure of energy supply or when connecting or
disconnecting the air hose.
11.Prolonged use will cause user fatigue. Periodic breaks are recommended for user safety.
12.It is recommended to stop operating the tool whenever the user experiences discomfort, tingling or pain
during use.
13.Beware if the compressed air hose breaks unexpectedly, or is being connected or disconnected
improperly. This whipping action may cause injury.
B
All manuals and user guides at all-guides.com
3