Loewe SL7 Instrucciones De Uso página 68

Loewe bild | Extended operating instructions

General usage
[Colour Temperature] - Adjusts how warm (red) or cool (blue) the white areas of an image appear.
[Expert Settings] – Options for fine-tuning the image for experts.
[Overscan] – Some content may have noise at the edges of the image. This option zooms in the image slightly to remove the noise.
[Reset Current Mode] – If you have made changes to the settings of the current picture mode and want to restore its original settings,
use this option.
[OLED calibration] – Start calibration of the OLED screen. Do not exert any mechanical force on the screen during calibration. This cali-
bration is also performed automatically during the night when the TV is in standby mode.
Sound
[Sound Mode] – Select one of the pre-set sound modes:
[Standard] – Standard option suitable for most content. Preserves the characteristics of original sound.
[Theatre] – Recommended when watching movies. This mode enhances the surround sound effect and highlights low-frequency
sounds, such as explosions.
[Music] – Recommended when listening to the music.
[Speech] – Setting to improve speech intelligibility, recommended for example when watching the news.
[Late Night] – Normalizes the volume of loud and soft sounds to the same level.
[Sports] – Recommended when watching sporting events.
[Dolby Atmos] – Dolby Atmos creates surround sound from your TV's speakers and enhances it to make it richer. It creates a true premium
entertainment experience.
Note: This feature is only applicable to Dolby Atmos content.
[Headphone] – settings for your wired or Bluetooth headphones. This menu item becomes available when you connect your headphones.
[Headphone mode] – Select behaviour of the TV speakers when headphones are connected.
[Headphone only] – The TV speakers are disabled when headphone is connected.
[Headphone with speakers] – Both the TV speakers and headphones outputs sound.
[Headphone Volume] – Menu to change the headphone volume. In [Headphone only] mode, you can change the headphone volume
directly using the volume buttons on the remote control. In [Headphone with speakers] mode, the headphone volume can be changed
from this menu, while the volume of the TV speakers is controlled using the volume buttons on the remote control.
[Sound Mode Settings] – Configuration of advanced sound settings:
[Apply Audio Settings] - Apply current sound mode to current input source or to all sources.
[Equalizer] – Displays a menu to change the volume of different frequencies. This setting affects only the TV speakers.
[Wall Mount Setup] – Optimizes the sound settings for the TV mounted on the wall.
[Auto Volume Control] – Automatically changes volume of all channels to the same level, so there is no difference in volume when
switching from one channel to another.
[Reset Current Mode] – If you have made changes to the settings of the current sound mode and want to restore its original settings,
use this option.
[Speakers] – Settings for internal and external speakers.
[Audio Output] – Select the type of speaker that will output sound.
[BT Sound Bar] – Bluetooth soundbar.
[ARC] – Soundbar or AV receiver connected via HDMI to the connectors labelled ARC or eARC.
[TV Speaker] – Internal TV speakers.
[SPDIF Only] – External audio device connected via an optical audio cable.
[Digital Audio Output] – When you want to use an external audio device that is connected to the TV via HDMI or optical audio cable,
you need to select whether the TV or the external device will be used to decode the audio. This menu is used for this purpose. Some
devices may not support all audio codecs needed to decode audio. With incorrect settings, you may not hear any sound from the
external device.
[Auto] – The automatic setting will try to select optimal option for your audio output. If you do not have sound from an external
device, try selecting other options in this menu.
[Pass Through] - the TV sends the original audio track without processing to an external device that decodes it.
[PCM] - The TV decodes the audio track and sends the decoded track to an external audio device.
[Dolby Audio] - The TV sends Dolby Digital compressed audio with support for up to 5.1 channels to an external device. This
option is recommended only for devices connected via an optical audio cable.
[Dolby Audio Plus] - The TV sends Dolby Digital Plus compressed audio with support for up to 7.1 channels to the external device.
This option only works for devices connected via HDMI ARC/eARC.
[Digital audio delay] – If the sound from external speakers is out of sync with the picture on the TV, use this option to reduce the delay
between sound and picture.
[Lip Sync] – If the sound from the TV's internal speakers is out of sync with the picture on the TV, use this option to reduce the delay
between sound and picture.
[Balance] – Adjusts the volume of the TV's left and right speakers to optimize the sound for a specific location.
68