Quick Reference Instructions - Amana RFS511MP Serie Manual De Instrucciones

Quick Reference Instructions

Read "Important Safety Information" before using
"Quick Reference Instructions". If there are
unanswered questions, see detailed sections of this
manual.
Operating Preprogrammed Pads
1. Open oven door, place food in oven, and close
oven door.
2. Press desired number pad.
3. Oven stops heating and oven signal sounds when
heating timing elapses.
Reviewing Preprogrammed Pads
1. Open oven door.
2. Press and hold (TIME ENTRY) pad for
approximately 15 seconds.
3. Press desired number pad.
4. Press (TIME ENTRY) pad to review heating
stages for pad.
5. Press (START) pad after reviewing
preprogrammed pad.
6. Press (RESET) pad or close oven door to exit
programming mode.
Manual Time Entry
1. Open oven door, place food in oven, and close
oven door.
2. Press (TIME ENTRY) pad.
3. Press number pads to enter desired cooking time.
4. Press a power level pad if power level other than
100 percent is required.
(START) pad.
5. Press
6. Oven stops heating and oven signal sounds when
heating timing elapses.
Preprogrammed Number Pads
1. Open oven door.
2. Press and hold pad 1 for approximately 15
seconds.
3. Press desired number pad.
4. Press number pads to enter desired cooking time.
5. Press a power level pad if power level other than
100 percent is required.
6. Press (START) pad to save new heating time
and power level in oven memory.
(RESET) pad or close oven door to exit
7. Press
programming mode.
All manuals and user guides at all-guides.com
Multiple Heating Stages
1. Open oven door.
2. Press pad 1 for approximately 15 seconds.
3. Press desired number pad.
4. Press number pads to enter desired cooking time.
5. Press a power level pad if power level other than
100 percent is required.
6. Press
7. Press
and power level in oven memory.
8. Press
programming mode.
Deactivating Preprogrammed Pad
1. Open oven door.
2. Press and hold pad 1 for approximately
15 seconds.
3. Press desired number pad.
4. Press hidden pad.
5. Press
6. Press
programming mode.
Reactivating Preprogrammed Pad
1. Open oven door.
2. Press and hold pad 1 for approximately
15 seconds.
3. Press desired number pad.
4. Press hidden pad.
5. Program pad according to "Preprogrammed
Number Pads" section step 5-7.
6. Press
7. Press
programming mode.
User Options
1. Open oven door.
2. Press and hold pad 1 for approximately 15
seconds.
3. Press hidden pad.
4. Press
See table for options.
5. Press number pad (0,1-3) to change option.
6. Press
7. Press
programming mode.
16
(TIME ENTRY) pad.
(START) pad to save new heating time
(RESET) pad or close oven door to exit
(START) pad to save in oven memory.
(RESET) pad or close oven door to exit
(START) pad to save in oven memory.
(RESET) pad or close oven door to exit
(START) pad to advance to next option.
(START) pad to save changes.
(RESET) pad or close oven door to exit