All manuals and user guides at all-guides.com
setup
CAmERA SET
You can configure the general settings of the camera module.
Select <mAIN mENU> - <CAmERA SET>.
1.
The Camera Setup menu appears.
Change the settings as necessary, or select
2.
an item to check.
CAmERA ID
Provide the ID and location for a camera that displays on the screen.
1.
Select <CAmERA SET> - <CAmERA ID>.
Use
_+ to select a desired character,
2.
▲▼
then press [ENTER].
In the lower input box of the screen, the
selected character will be entered.
You can enter up to 54 characters including
alphabets, numbers and special characters.
LOCATION : Specify the display position
of the camera ID.
3.
When done, press [ENTER].
The camera ID will be displayed in the specified position.
vPS
If you set it to <ON>, the camera images will be displayed in progressive mode.
M
VPS is only available for SCC-C4255 and SCC-C4355.
1_ setup
CAMERA SET
CAMERA ID
VPS
IRIS
MOTION
DNR
SHUTTER
SENS-UP
FLICKERLESS
XDR
ABCDEFGHIJKLMNOPQRSTUVWXYZO
123456789 : ? _ +
()/
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
OFF
OFF
ALC
(F.FAST) ---
MID
(OFF) ---
AUTO X4
OFF
MID