All manuals and user guides at all-guides.com
setup
v-SyNC
You can set the V-SYNC mode.
- If you select <INT>, the camera will use the internal synchronization.
- If selecting <LINE>, the camera will use an external power frequency for
synchronization. The LL-PHASE can be adjusted as appropriate.
M
It's a must to use AC 24V power supply when you select line lock for SCC-C4353 and
SCC-C4355.
Line lock is not available for SCC-C4253 and SCC-C4255.
AGC COLOR SUP
You can adjust the color reproduction range
according to AGC.
REvERSE
You can reverse the video signal from left
to right, upside down, or vice versa to your
convenience.
POSI/NEGA
You can set the video brightness signal to normal or reverse.
PIP
You can view a main image with a sub image on the same screen.
M
If more than one PRIVACY ZONE is specified, and PRIVACY SET to <ON>, the PIP
function is not available.
As long as SENSE UP is set to FIXED, PIP menu is not available.
According to the luminance, PIP will disappear if the SENSE UP menu is set to AUTO.
DIS
If you set it to <ON> for a camera that is trembled or vibrated from an ambient
change, this will automatically compensate for the flicker on the screen.
M
If you set <DIS> to <ON>, the image will be enlarged with digital zoom as much
area as compensated.
_ setup
DAY/NIGHT
WHITE BAL
FOCUS MODE
ZOOM SPEED
DISPLAY ZOOM
DIGITAL ZOOM
DETAIL
V-SYNC
AGC COLOR SUP
AUTO
ONEAF
[2]
OFF
X16
[2]
INT
MID