Riello 40 F20 Instrucciones Para La Instalación, Uso Y Mantenimiento página 16

DIMENSIONS
Flange
213
160
190
MOUNTING THE BURNER
It is necessary that the two insulating
gaskets (10, fig. 1) are placed between
the boiler door and the burner flange.
These insulating gaskets have four
holes, which, if necessary, can be modi-
fied as shown on the drawing on the right.
Verify that the installed
burner is lightly leaned
towards the button.
(See figure 2).
The burner is designed to
allow entry of the flexible
oil-lines on either side of
the burner.
2095
Burner
350
= =
D5242
Fig. 2
D5572
2
GB
114 299
45
BURNER FIXING AND
HINGE ASSEMBLY
D5313
S7385