Legalities - ISOtunes AIRDEFENDER Manual Del Usuario

LEGALITIES

Fitting
R
FIG 2
FIG 1
ANSI S3.19-1974 Table (NRR Table)
EN 352-2:2002 Table (SNR Table)
Models
IT-46 AIR DEFENDER
IT-47 AIR DEFENDER EN 352
Important
Please read, understand, and follow all safety information.
Full manual can be found at
ISOtunes.com/AIRDEFENDERManual
Fitting
1. Pull the earcups apart
2. Place the product on your head
3. Adjust the earcup position by extending the headband to
ensure a good fit around the ears
Introduction
Thank you for purchasing ISOtunes® AIR DEFENDER professional
noise isolating headphones. These headphones have been
specifically designed for use in noisy environments – allowing you
to block out much of the surrounding noise so that you can listen
to your music or talk on the phone with less interruption.
Noise Attenuation APPROVAL
FIG 3
This product has been tested to the European Safety Standard
EN352-1:2002 and the ANSI S3.19-1974 standard for a hearing
protector, with a Single Number Rating (SNR) of 30 dB and a Noise
Reduction Rating (NRR) of 24 dB. Full testing details are available
in the Noise Attenuation section of this booklet.
ANSI
B5:
SNR: 27 dB
S3.19-1974
H= 29 dB
M= 24 dB
The level of noise entering a person's ear, when ISOtunes®
L= 19 dB
AIR DEFENDER headphones are worn as directed, is closely
APVf=MF-SF9 (dB)
approximated by the difference between the A-weighted
environmental noise level and the Noise Reduction Rating
(NRR). Improper fit of this device will reduce its effectiveness in
attenuating noise. Consult the enclosed instructions for proper
fitting.
A1: Frequency (Hz)
A2: Mean Attenuation (dB)
A3: Standard Deviation (dB)
Example:
1. The surrounding noise level measured at the ear is 100 dB.
2. The NRR of ISOtunes® AIR DEFENDER is 24 dB.
3. The noise level entering the ear is approximately equal to 76dB.
Please note that the NRR is based on the attenuation of
continuous noise and may not be an accurate indicator of the
protection attainable against impulsive noise, such as gunfire.
EN | 10