Assembly; Description Of The Appliance; Start Up; Spray Lance With Pressure Regulation (Vario Power) Carrying Out The Most Common Cleaning - Kärcher K 2.93 Manual Del Usuario

Description of the Appliance

The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
dealer.
Illustrations on Page 2
1 Coupling element for water connection
2 Water connection with integrated sieve
3 High pressure connection
4 Detergent suction hose (with sieve)
5 Carrying handle
6 Mains cable with mains plug
7 Appliance switch „0/OFF" / „I/ON"
8 Trigger gun
9 Lock trigger gun
10 Clamp for high pressure hose
11 High pressure hose
12 Spray lance with pressure regulation
(Vario Power)
Carrying out the most common cleaning
tasks. The work pressure can be stage-
lessly regulated between "Min" and
"Max". You can add detergent when
"Mix" is selected.
In order to adjust the working pressure,
release the lever of the trigger gun and
turn the spray lance to the desired posi-
tion.
13 Spray lance with Dirtblaster
For strong contaminations
** Additionally required
14 Use a fabric reinforced water hose.
- Minimum diameter, 1/2 inches (13 mm).
- Minimum length 7.5 m.

Assembly

Mount loose parts delivered with appliance
prior to start-up.
Illustrations on Page 2
Illustration
 Screw the coupling element to the wa-
ter connection on the appliance.
Illustration
 Pull out the clamp for the high pressure
hose from the trigger gun.
Illustration
 Connect high pressure hose to trigger
gun.
 Push the clamp in until it locks. Check
the secure connection by pulling on the
high-pressure hose.

Start up

 Park the appliance on an even surface.
Illustration
 Connect the high pressure hose to the
high pressure connection of the appli-
ance.
 Insert the mains plug into the socket.

Water supply from mains

For connection values, see type plate/tech-
nical data.
Observe regulations of water supplier.
ATTENTION
Impurities in the water can damage the
high-pressure pump and the accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
Illustration
 Attach the water supply hose to the
coupling on the water connection.
 Connect the water supply hose to the
water supply.
 Completely open the water tap.
English 17