auna Stereosonic Manual De Instrucciones página 42

EN
42
Information provided by RDS
Each time the RDS DISPLAY button is pressed, the display will switch as
follows:
When tuning in to a station other than an RDS station or to an RDS station
which sends weak signal, the display will change in the following order.
Notes for RDS operation:
• If any of the following events occur, it does not mean that the unit is
faulty:
• "PS", "No PS" and a station name appear alternately, and the unit does
not operate properly.
• If a particular station is not broadcasting properly or a station is
conducting tests, the RDS reception function may not work properly.
• When you receive an RDS station whose signal is too weak, information
like the station name may not be displayed.
• "No PS", "No PTY" or "No RT" will flash for about 5 seconds, and then
the frequency will be displayed.
Notes for radio text
• The first 14 characters of the radio text will appear for 4 seconds and
then they will scroll across the display. If you tune in to an RDS station
which is not broadcasting any radio text, "No RT" will be displayed
when you switch to the radio text position.
• While radio text data is received or when the text contents change, "RT"
will be displayed.
Using the Auto Station Programme Memory (ASPM)
While in the ASPM operation mode, the tuner will automatically search
for new RDS stations. Up to 40 stations can be stored.If you have already