Cd Player - auna Stereosonic Manual De Instrucciones

EN
44

CD PLAYER

1. Press the STANDBY button on the remote control or ON/OFF button to
turn on the power on.
2. Press SOURCE button or CD/USB button on the remote control to turn
on the CD mode.
3. Press the OPEN/CLOSE button to open the disc compartment.
4. Playback will start from track 1 once the Player has finished reading the
TOC. The PLAY INDICATOR will appear steadily on the LCD DISPLAY.
5. While playing, press the PLAY/PAUSE button to pause, the PAUSE
indicator will appear steadily on the LCD DISPLAY. Press the PLAY/
PAUSE button again to resume playing.
6. Adjust the volume using the VOLUME control.
Playback MP3/WMA-disc
1. Press the CD/USB button on the remote control, and load an MP3/ WMA disc.
2. Press the PRESET/FOLDER (˄ or ˅), ) button to select desired playback
folder.
3. Select desired file to be played back by pressing the SKIP FORWARD
 or SKIP BACKWARD  button.
4. Press the PLAY/PAUSE button. Playback will start and file name will be
displayed.
NOTE
In case of playback with the folder mode on, press the PRESET/FOLDER (or)
button, and the folder can be selected even though it is in playback/pause
mode. It will continue playback/pause mode in the 1st track of the selected
folder.