Tools Required - Everbilt PCP10001-VSP Guía De Uso

IMPORTANT: This pump is made of high-strength,
corrosion-resistant materials. It will provide trouble-free
service for a long time when properly installed, maintained,
and used. However, inadequate electrical power to the
pump, dirt, or debris may cause the pump to fail. Please
carefully read the manual and follow the instructions
regarding common pump problems and remedies.
APPLICATION
This swimming pool pump is designed for use with permanently installed swimming pools only. A permanently installed pool is constructed in or
on the ground or in a building and is not intended to be disassembled or moved.
Do not use with storable portable pools. A storable pool is constructed so that it may be readily disassembled for storage and reassembled to its
original integrity.

TOOLS REQUIRED

Flathead
Screwdriver
Pipe Wrench
Phillips
Screwdriver
Hacksaw
IMPORTANT: Provide sufficient ventilation to maintain air
temperature below the maximum ambient temperature rating
shown on the motor nameplate. Any enclosure or pump
house must allow adequate ventilation to assure the ambient
temperature remains below the motor rating when the pump
is operating.
Wrench
Tape Measure
Safety Goggles