Cleaning And Maintaining The Machine; Maintaining The Machine - Weidmuller CRIMPFIX ECO Traduccion Del Manual De Instrucciones Originales

7

Cleaning and maintaining the machine

7.1 Maintaining the machine

To ensure proper operation, the described maintenance
work must be carried out at the specified intervals, see
chapter 7.2.
To easily access all areas inside the machine,
you should remove the waste tray before begin-
ning maintenance work. Remember to re-insert it
after completing work.
Have ready for the maintenance work:
– Set of Allen wrenches
– Brush and cleaning cloth
– Teflon spray
– Only for the drive shaft: grease, suitable for
roller bearings
44 2859970000/00/02.2022