Functioning; Positive Or Negative Timed Blast Chilling Cycle + Preservation; Positive Or Negative Blast Chilling Cycle With Needle Probe + Preservation - Friulinox BF030AG Manual De Uso, Mantenimiento E Instalación

Abatidor de temperatura
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN - 22

7.2 FUNCTIONING

7.2.1 POSITIVE or NEGATIVE TIMED BLAST CHILLING CYCLE + PRESERVATION

Start blast chilling cycle
Press
to select "PoS", in the case of positive blast chilling or "nEg", for negative blast chilling.
The LED
flashes.
By pressing
, the display shows duration of blast chilling.
To modify the value, act on the
Pressing
, the display shows the work set-point for blast chilling (°C/°F).
To modify the value, act on the
Now press
to start the cycle.
Blast chilling
The display shows the residual time of blast chilling duration:
The duration of blast chilling is established by the time value set after confirmation of the type of cycle.
Press
several times to:
- display the indication of the type of cycle selected ("PoS" or "nEg");
- know the cell temperature;
- exit the procedure.
Blast chilling end
The machine passes to the preservation phase: the display shows "End".
The buzzer is activated automatically and continues to ring for the duration of the pre-established time. To silence it,
press a key and then press it again to cancel the "End" indication.
Preservation
The display shows the cell temperature:
The temperature of the cell is established by the parameter pre-set depending on the cycle.
Press
several times to:
- display the indication of the type of cycle selected ("PoS" or "nEg");
- exit the procedure.
To interrupt the cycle
Press
for a prolonged period of time.

7.2.2 POSITIVE or NEGATIVE BLAST CHILLING CYCLE WITH NEEDLE PROBE + PRESERVATION

Start blast chilling cycle
Press
to select "PoS", in the case of positive blast chilling or "nEg", for negative blast chilling.
The LED
flashes.
By pressing
, the display shows the blast chilling end SET core temperature.
To modify the value, act on the
Pressing
, the display shows the work set-point for blast chilling (°C/°F).
To modify the value, act on the
Now press
to start the cycle.
or
key.
or
key.
+
they are on.
or
key.
or
key.
it is on.

Publicidad

Tabla de contenido
loading

Tabla de contenido