Required Tools And Equipment; Safety Considerations - Rockwell Automation Allen-Bradley SLC 5/03 Instrucciones De Instalación

All manuals and user guides at all-guides.com
SLC 5/03™, SLC 5/04™, and SLC 5/05™ Modular Processors
6

Required Tools and Equipment

• medium blade screwdriver
• programming equipment
• a 1747-PIC, 1784-KTX, or 1784-PCMK communication interface (or standard
Ethernet PC board - SLC 5/05 only)

Safety Considerations

ATTENTION: Never install, remove, or wire any module while
power is applied. Also, do not expose processor modules to surfaces
!
or other areas that may typically hold an electrostatic charge.
Electrostatic charges can alter or destroy memory.
For general recommendations concerning installation safety requirements and safety
related work practices, refer to the requirements specific to your region.
• Europe: Reference the standards found in EN 60204 and your national
regulations.
• United States: refer to NFPA 70E, Electrical Safety Requirements for Employee
Workplaces.
Important:
See page 13 for information on proper battery handling, storage, and
transporting.
Publication 1747-IN009A-ML-P