Neckstrap Attachment - Alpen Optics APEX XP 10x42 Manual De Instrucciones

Angle measurement
The Angle of your measurement position to any
target can be displayed in the upper area of the
display.

Neckstrap Attachment

To securely attach your binocular to the
binocular strap:
1. Thread the end of the strap from the bottom up
through the strap attachment loop.
2. Hold the buckle and thread the end of the strap
inside the buckle.
3. Adjust the overall length and pull the strap
webbing tight so it is secure within the buckle.
www.alpenoptics.de
10
Waterproof / Fogproof Models
ALPEN binoculars are designed and built utilizing
the latest waterproof and fogproof technology (this
will be noted on the product packaging). Waterproof
models are O-ring sealed for complete moisture
protection. Fogproof protection is achieved from dry
nitrogen purging that removes all internal moisture.
Tripod Mounting
(tripod and tripod adapter not included)
To attach the binocular to a tripod or monopod,
unscrew (counter-clockwise) the cap which covers
the threaded socket at the far end of the center
hinge, and set it aside in a safe place. Use a compa-
tible binocular tripod adapter accessory to attach
your binocular to any standard tripod in a hori-
zontal position to provide a stable image during
prolonged viewing.