Operating/Indicator panel
ON-OFF button
Press to turn the power ON or OFF
FAN button
Press to cycle between FAN settings
Accessories
Operation manual ... 1
Preparation Before Operation
1
Positioning the unit
Before installation, peel off
the tape fi xing the power
supply cord to the bottom
of the unit and draw out the
power supply cord.
Power supply cord
Tape (blue)
At least 100cm
away from ceiling
At least 10cm
away from wall
At least 30cm
away from wall
• Choose a position from where airfl ow can reach all areas
• Place on a stable surface. If the unit is placed on an
• If you fi nd that interference from the power circuit inside
Attention
• To avoid staining of walls, position the unit in accordance
At least 30cm
away from wall
• When used for a long period of time in the same location,
Air fl ow
MODE button
Press to active SLEEP MODE
Deodorising fi lter ................1
Attach to the unit before operation.
Pointers for good positioning
of the room.
unstable surface, vibrations from the unit may be amplifi ed.
the unit or cables caused interference on your TV screen
or static noise to be emitted from nearby radios or stereos,
move the unit to at least 2m away from the device.
Keep cordless phones and radio-controlled clocks away
from the unit also.
with the positioning measurements in the illustration.
However, note that since this unit draws in dirty air, certain
types of wall may become stained even if the
measurements are adhered to.
In such cases, be sure to maintain suffi cient distance
between the unit and the wall.
the fl oor and surrounding walls may get stained as air is
drawn into air inlets near the base of the unit. It is
recommended to clean the unit periodically.
Read First
6