3
Attaching the deodorising filter
CAUTION
Carry out these steps before inserting the
power supply plug.
1.
Remove the deodorising filter
unit from the main unit.
Deodorising fi lter unit
►Page 14
Back side of the deodorising fi lter unit
Hooks
Fixed parts
2.
Remove the deodorising filter
from the bag.
As your hands may become dirty due
to dust from the deodorising fi lter, be
sure to wear gloves and wash your
hand after the process.
►Page 14
Pre-fi lter
Deodorising fi lter
3.
Attach the deodorising filter.
1 Set the deodorising fi lter under the
fi xed parts. (2 places)
Deodorising fi lter
2 While spreading the protrusions on
the hooks of the deodorising fi lter
unit, push the deodorising fi lter in and
set it under the hooks in 2 places to
attach.
Hooks
Deodorising fi lter
(Back side of deodorising fi lter unit)
3 Double check that the deodorising
fi lter is set under the hooks.
Deodorising fi lter
(Back side of deodorising fi lter unit)
4.
Install the deodorising filter unit
into the main unit.
• When starting operation, if
the MODE lamp blinks, the
deodorising filter is not
properly attached.
• Observe local waste separation rules
when disposing of the fi lter bag and
desiccant.
Read First
Fixed parts
Hooks
Fixed parts
►Page 14
8