Gree GMV-ND22C/A-T Manual De Usuario página 14

Cautions
①. Insulate the joint of the pipes securely.Incomplete insulation may lead to water leakage.
②. Push the pipe inside so it does not place undue force on the front grille.
Connecting the drain hose
Insert the supplied C drain hose into the socket of the drain pan.
Fully insert the drain hose until it adheres to a seat of the socket.
Warning
With a Multi indoor unit, install as described in the installation manual supplied with the
outdoor unit.
Live the sensor securing plate, remove the front metal plate cover, and connect the wire to the
therminal board.
（1）Open the cover of electric box of indoor unit.
（2）Lead the communication line across the rubber ring.
（3）Connect the communication line to terminal D1 and D2 on the wiring board of indoor
unit.
（4）Secure the communication line with the wire clamp on the electric box. Pull wires to make
sure that they are securely latches up, then retain wires with wire retainer.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Multi Variable Air Conditioners Floor and Wall Mounted Type Indoor Unit
11