WINE K CELL AR 36 ECOSMART
Start-up and use
CONTROL PANEL FUNCTIONS
ON / OFF button
When the appliance is off (all LEDs are off), it is switched on by pressing the ON/OFF button once.
When the appliance is on (at least LED 3 lit), it is switched off by keeping the ON/OFF button
pressed for 5 seconds.
Interior Light button
If LED 4 is off, by pressing the Interior Light button for at least one second, LED 4 lights up and
indicates that the interior light in the ageing compartment will remain always on. If LED 4 is lit,
by pressing the Interior Light button for at least one second, LED 4 turns off, indicating that the
interior light in the ageing compartment will only switch on when the door opens.
Temperature settings button
When the temperature settings button is pressed for 5 seconds, LEDs 1-2-3 flash, depending
on the set temperature.
The set temperature can be raised or lowered by pressing the temperature settings button once
or several times while the temperature LEDS are flashing.
The following combinations indicate the three temperature setting levels:
LED 3 ON / LED 2 - 1 OFF = warmest temperature.
LED 3 - 2 ON / LED 1 OFF = medium temperature.
LED 3 - 2 - 1 ON = coolest temperature.
TEMPERATURE SETTINGS TABLE
Temperature indicator
LEDs
1
2
STANDARD Mode operation (power cable connected only)
OFF
OFF
OFF
ON
ON
ON
TIMER Mode operation (requires setting with remote control)
OFF
OFF
OFF
ON
ON
ON
SMART mode operation (power and signal cable connected)
OFF
OFF
OFF
ON
ON
ON
//
//
WINE K CELLAR 36 ECOSMART_14-04-2022
3
ON
Warmest temperature setting
ON
Medium temperature setting
ON
Coolest temperature setting
ON
The appliance works exclusively within the
temperature range set with the remote con-
ON
trol. For this reason, there is no assurance of
reaching the target temperature.
ON
ON
ON
No guest in the room
ON
//
Guest in the room
DESCRIPTION
22
Set
temperature
(± 1°C)
14 °C
10 °C
6 °C
Target 14 °C
Target 10 °C
Target 6 °C
After 24 hours:
7°C
13°C