aflamo AV-WM36ALB-NH Manual Del Propietário página 6

Read and understand this entire owner's manual, including all safety information,
before plugging in or using this product. Failure to do so could result in electric shock,
fire, serious injury, or death.
Power
Plug the power cord into a 220~240 Volt (see IMPORTANT SAFETY INFORMATION on Pages 2
and 3). Make sure the outlet is in good condition and that the plug is not loose. NEVER exceed the
maximum amperage for the circuit. DO NOT plug other appliances into the same circuit.
BUTTON
ON: Enables control panel functions and
remote control. Turns on flame effect.
OFF: Disables control panel functions and
remote control. Turns off flame effect.
POWER
FLAME "-": Makes flame effect dimmer.
NOTE: Flame effect stays on until
power button is turned off. Flame effect
must be on for electric fireplace to turn
on.
FLAME
FLAME "+": Makes flame effect brighter.
NOTE: Flame effect stays on until
power button is turned off. Flame effect
must be on for electric fireplace to turn
on.
FLAME
Remote Control Battery Information
This remote control uses two AAA batteries
NEVER dispose of batteries in fire. Failure to observe this precaution may result in an
explosion. Dispose of batteries at your local hazardous material processing center.
FUNCTION
(Not
www.aflamo.com
ACTION & INDICATION
1. Press once. Indicator light turns on.
Power turns on. All functionsenabled.
2. Press again. Flame effect turns off.
Power and all functions turn off.
1. Press once. Flame effect gets dimmer.
2. Press again until desired setting is
reached. Flame effect continues to
get dimmer each time button is
pressed.
1. Press once. Flame effect gets brighter.
2. Press again until desired setting is
reached. Flame effect continues to
get brighter each time button is
pressed.
Included)
6