Symbols Indicated Health Risks; Electric Shock; Caution! Hot Surface; Risk Of Fire - BGS technic 3391 Instrucciones De Uso

2.3

SYMBOLS INDICATED HEALTH RISKS

2.4

ELECTRIC SHOCK

CAUTION! Never remove casing and do any activity with the induction heater unless
you have first disconnected the plug from the socket. Then wait at least 1-2 minutes
after unplugging it.
DO NOT WORK WITH THE DEVICE IN RAIN AND HUMID AREAS.
CAUTION! Any interventions in the electric section may only be made by
persons with adequate electrical engineering qualifications. There is a risk of
electric shock during any unauthorised servicing.
2.5

CAUTION! HOT SURFACE

CAUTION! Do not touch any objects located near the induction heater unless
you have checked that it has cooled down.
Do not touch the induction coil if it is activated and the strong magnetic field and
heating are turned on.
Always wear protective gloves or other aids while working with the INDUCTION
HEATER, as there is a risk of burns from the heating inductor or the heated
working medium in the device.
2.6

RISK OF FIRE

DO NOT OPERATE THE EQUIPMENT IN ENVIRONMENTS WITH AN EXPLOSION
HAZARD!
Do not overheat parts.
Do not heat materials above their melting temperature, as there is a risk of scalding with
hot metal burns.
Be careful about fire near the INDUCTION HEATER. Keep inflammable substances
outside the working area of the INDUCTION HEATER.
Do not put the device on, over or near inflammable surfaces.
Do not use the device if it is near objects that may contain inflammable particles of dust,
gas, vapour or liquids. After completion of work with the device, check the area to make
sure everything is secure and there is no risk of sparks, flames and fire.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
7
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed