MSW Motor Technics MSW-BC-A Manual De Instrucciones página 24

#
1 Status LED flashing red
2 Status LED continuously red
3
6 V or 12 V LED flashing
4 STD LED on
5 AGM LED on
6 LIT LED on
6 V or 12 V LED flashing + Status
7
LED continuously red
6 V or 12 V LED flashing + Status
8
LED flashing green
9
Status LED continuously green
6 V or 12 V LED flashing +
10 STD/AGM/LIT LED on + Status LED
flashing red
PREPARATIONS FOR CHARGING
Prepare the battery for charging with reference to its user manual issued by the
battery manufacturer.
LED INDICATORS – LEGEND
LED STATE INDICATION
No battery connected/reversed
polarity of connections/battery
voltage too low
Battery properly connected;
correct battery voltage
Standby for the 6 V / 12 V battery
Charging an STD battery
Charging an AGM battery
Charging an LIT battery
DC charging a 6 V / 12 V battery in
progress
Direct voltage charging a 6 V / 12 V
battery in progress
Battery charging finished
Overheating alarm (the appliance
temperature is above 106°C)